Paint stirrer PT- Anest Iwata.
Pressure coating PT Series:
Pressure paint tank is convenient to paint 1 color continuously.
Both manual and automatic gums are available, equipped with a mixing unit to avoid paint deposition.
High pressure paint bottle, suitable for paint with high viscosity or adhesives.
Paint pots for water based paints:
Inside the storage walls, where it comes in contact with paint, is treated to prevent rust.
Hand-held mix, straw and the part submerged in the paint is stainless steel.
The body of the suction filter, the vortex plate, the auxiliary tape, the fixed tape is alkaline plated.
The blades are also plated with chromium (hand mixing) and alkali plating (auto mixing).
|Manual Mixing Type: PT-10D to PT-80D (common paint)||Manual mixing type PT-10DW / PT-20DW (water-based paint)|
|Capacity||10 ~ 80 liters||10 ~ 20 liters|
|Liquid pressure||0.18 ~ 0.34 Mpa||0.34 Mpa|
|Suction filter||60 ~ 70 Meshi||70 Meshi|
|Air inlet||G1 / 4B (PF1 / 4)||G1 / 4B (PF1 / 4)|
|Air out||G1 / 4B (PF1 / 4)||G1 / 4B (PF1 / 4)|
|Liquid out||G3 / 8B (PF3 / 4)||G3 / 8B (PF3 / 4)|
|Weight||13 ~ 39g||13 ~ 20g|
Features of paint stirring series Mazeco:
The outstanding advantage of Mazeco paint stirring is that the motor has radial piston compressed air compared to the pneumatic propeller motor.
Can adjust low speed revs without reducer.
Simple mechanism, fewer parts, less rotation speed, much less air consumption.
The shafts are made of stainless steel and can be used for various liquids. However, it is not intended for food and medical use.
Paint stirrer Series AMM-7:
New design 3-blade type (made of plastic) with outstanding performance (maximum stirring force and flow efficiency).
Compared with conventional type, paint stirrer Series AMM-7 There is a counter-clockwise movement of the stirring so the liquid speed at the bottom of the bottle is very strong, the flow rate is strong, so there is no phenomenon of paint deposition.